July 11, 2024

If you have a garage door, then at some point you may have had to adjust the cable tension. This is a process that many people are unsure of how to do properly. In this blog post, we will walk you through the entire process of adjusting the cable tension on your garage door. 

Adjusting garage door cable tension can be a tricky process, but we are here to help. The first thing you need to do is locate the adjusting screws on the bottom brackets of your garage door. These screws will be different depending on the type of garage door you have. Once you have found the adjusting screws, you will need to loosen or tighten them in order to adjust the tension. 

If you are unsure of how to properly adjust garage door cable tension, please consult a professional. This is not a job that should be attempted by someone who is not experienced. Adjusting the tension on your garage door cables is a delicate process and one wrong move could result in serious injury.

How to adjust garage door cable tension?

Now that you know where the adjusting screws are, it’s time to get started. The first thing you need to do is loosen or tighten the adjusting screws in order to change the tension. You will need to experiment a bit to find the perfect tension for your door. Once you have found the right tension, be sure to check the door regularly to make sure that the tension stays the same. Adjusting garage door cable tension is an important part of keeping your garage door in good working order. 

See also  How to log in, register and pay bills for your Amazon Credit Card.

How we fix a loose cable on a garage door?

If you have a loose cable on your garage door, you will need to adjust the tension. To do this, simply loosen or tighten the adjusting screws on the bottom brackets of your garage door. Once you have found the perfect tension for your door, be sure to check the cables regularly to make sure they stay tight.

Why are my garage door cables loose?

There are a few reasons why your garage door cables may be loose. One reason could be that the adjusting screws have come loose. Another possibility is that the cables have stretched over time and need to be adjusted. If you are unsure of why your garage door cables are loose, please consult a professional.

What happens if I don’t adjust my garage door cables?

If you don’t adjust your garage door cables, the doors could fall off track or become damaged. Additionally, the cables could snap and cause serious injury. It is important to regularly check your garage door cables and adjust them as needed.

The amount of tension a garage door spring should have will depend on the weight of the door. For a standard-size garage door, the springs should have about 150 pounds of tension. If you have a heavy-duty door, the springs may need to be closer to 200 pounds of tension.

Leave a Reply

Your email address will not be published. Required fields are marked *